[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Mon, 26 Sep 2022 21:33:22 -0700
From: Colin Cross <ccross@...roid.com>
To: Rich Felker <dalias@...c.org>
Cc: musl@...ts.openwall.com, Ryan Prichard <rprichard@...gle.com>,
Rodger Combs <rodger.combs@...il.com>
Subject: Re: Running musl executables without a preinstalled dynamic linker
On Mon, Sep 26, 2022 at 4:12 PM Colin Cross <ccross@...roid.com> wrote:
>
> On Mon, Sep 26, 2022 at 4:02 PM Rich Felker <dalias@...c.org> wrote:
> >
> > On Mon, Sep 26, 2022 at 03:42:01PM -0700, Colin Cross wrote:
> > > On Mon, Sep 26, 2022 at 3:38 PM Colin Cross <ccross@...roid.com> wrote:
> > > >
> > > > On Tue, Aug 23, 2022 at 1:18 AM Szabolcs Nagy <nsz@...t70.net> wrote:
> > > > >
> > > > > * Colin Cross <ccross@...roid.com> [2022-08-22 17:22:06 -0700]:
> > > > > > On Sat, Aug 20, 2022 at 2:43 AM Szabolcs Nagy <nsz@...t70.net> wrote:
> > > > > > > i would not use Scrt1.o though, the same toolchain should be
> > > > > > > usable for normal linking and relinterp linking, just use a
> > > > > > > different name like Xcrt1.o.
> > > > > >
> > > > > > Is there some way to get gcc/clang to use Xcrt1.o without using
> > > > > > -nostdlib and passing all the crtbegin/end objects manually?
> > > > >
> > > > > this requires compiler changes (new cmdline flag) but then i think
> > > > > the code is upstreamable.
> > > >
> > > > I've used relinterp.o for now, and selected instead of Scrt1.o in
> > > > musl-gcc.specs and ld.musl-clang.
> > > >
> > > > >
> > > > > > > i would make Xcrt1.o self-contained and size optimized: it only
> > > > > > > runs at start up, this is a different requirement from the -O3
> > > > > > > build of normal string functions. and then there is no dependency
> > > > > > > on libc internals (which may have various instrumentations that
> > > > > > > does not work in Xcrt1.o).
> > > > > >
> > > > > > Doesn't this same logic apply to most of the code in dynlink.c? My
> > > > > > main worry with a self contained implementation is that it requires
> > > > > > reimplementations of various string functions that are easy to get
> > > > > > wrong. The current prototype reuses the C versions of musl's string
> > > > > > functions, but implements its own syscall wrappers to avoid
> > > > > > interactions with musl internals like errno.
> > > > >
> > > > > dynlink is in libc.so so it can use code from there.
> > > > >
> > > > > but moving libc code into the executable has different constraints.
> > > > > so you will have to make random decisions that string functions are
> > > > > in but errno is out, wrt which libc internal makes sense in the exe.
> > > > >
> > > > > i would just keep a separate implementation (or at least compile
> > > > > the code separately). string functions are easy to implement if
> > > > > you dont try to optimize them imo. then you have full control over
> > > > > what is going on in the exe entry code.
> > > >
> > > > I left the reimplementations of string functions and syscalls as
> > > > suggested. Patch attached.
> >
> > > From 0df460188b95f79272003bd0e5c12bceb2a3c25f Mon Sep 17 00:00:00 2001
> > > From: Colin Cross <ccross@...roid.com>
> > > Date: Thu, 22 Sep 2022 19:14:01 -0700
> > > Subject: [PATCH] Add entry point to find dynamic loader relative to the
> > > executable
> > >
> > > Distributing binaries built against musl to systems that don't already
> > > have musl is problematic due to the hardcoded absolute path to the
> > > dynamic loader (e.g. /lib/ld-musl-$ARCH.so.1) in the PT_INTERP header.
> > > This patch adds a feature to avoid the problem by leaving out PT_INTERP
> > > and replacing Scrt1.o with an entry point that can find the dynamic
> > > loader using DT_RUNPATH or LD_LIBRARY_PATH.
> > >
> > > The entry point is in crt/relinterp.c. It uses auxval to get the
> > > program headers and find the load address of the binary, then
> > > searches LD_LIBRARY_PATH or DT_RUNPATH for the dynamic loader.
> > > Once found, it mmaps the loader similar to the way the kernel
> > > does when PT_INTERP is set. The musl loader uses PT_INTERP to set
> > > the path to the loader in the shared library info exported to the
> > > debugger, so relinterp creates a copy of the program headers
> > > with the PT_INTERP entry added pointing to the found location of
> > > the dynamic loader. It updates AT_BASE to point to the address
> > > of the dynamic loader, then jumps to the loaders entry point.
> > >
> > > The dynamic loader then loads shared libraries and handles
> > > relocations before jumping to the executable's entry point, which is
> > > the entry point in relinterp.c again. Relinterp detects that
> > > relocations have been performed and calls __libc_start_main, the
> > > same way Scrt1.o would have.
> > >
> > > Since relinterp runs before relocations have been performed it has
> > > to avoid referecing any libc functions. That means reimplementing
> > > the few syscalls and string functions that it uses, and avoiding
> > > implicit calls to memcpy and memset that may be inserted by the
> > > compiler.
> > >
> > > Enabling relinterp is handled in the spec file for gcc and in
> > > the linker script for clang via a -relinterp argument.
> > >
> > > Normally gdb and lldb look for a symbol named "_dl_debug_state" in
> > > the interpreter to get notified when the dynamic loader has modified
> > > the list of shared libraries. When using relinterp the debugger is
> > > not aware of the interpreter (at process launch PT_INTERP is unset
> > > and auxv AT_BASE is 0) so it doesn't know where to look for the symbol.
> > >
> > > They fall back to looking in the executable, so we can provide a symbol
> > > in relinterp.c for it to find. The dynamic loader is then modified
> > > to also find the symbol in the exectuable and to call it from its own
> > > _dl_debug_state function.
> > >
> > > The same tests in libc_test pass with or without LDFLAGS += -relinterp
> > > with both musl-gcc and musl-clang.
> > >
> > > Ryan Prichard (rprichard@...gle.com) authored the original prototype
> > > of relinterp.
> >
> > Have you looked at https://www.openwall.com/lists/musl/2020/03/29/9
> > where this has already been done? It's not upstream but my
> > understanding is that the author has been using it successfully for a
> > long time, and it's been through some review and as I recall was at
> > least close to acceptable for upstream.
> >
> > Rich
>
> No, I had not seen that, and it looks to have identical functionality.
> I'll experiment with switching to it.
dcrt1 seems to be a perfect drop in replacement for this. Quick
testing shows it works for my needs on x86_64, x86, aarch64 and arm
architectures. I've attached a minor patch that fixes some unused
variable and label warnings.
View attachment "0001-Fix-unused-variable-and-label-warnings-in-dcrt1.c.patch" of type "text/x-patch" (1607 bytes)
Powered by blists - more mailing lists
Confused about mailing lists and their use?
Read about mailing lists on Wikipedia
and check out these
guidelines on proper formatting of your messages.
