Follow @Openwall on Twitter for new release announcements and other news
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date: Mon,  1 Jan 2018 19:33:20 +0100
From: Hauke Mehrtens <hauke@...ke-m.de>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-api@...r.kernel.org,
	musl@...ts.openwall.com,
	felix.janda@...teo.de,
	f.fainelli@...il.com,
	carlos@...hat.com,
	ldv@...linux.org
Subject: [PATCH v4] uapi libc compat: add fallback for unsupported libcs

From: Felix Janda <felix.janda@...teo.de>

libc-compat.h aims to prevent symbol collisions between uapi and libc
headers for each supported libc. This requires continuous coordination
between them.

The goal of this commit is to improve the situation for libcs (such as
musl) which are not yet supported and/or do not wish to be explicitly
supported, while not affecting supported libcs. More precisely, with
this commit, unsupported libcs can request the suppression of any
specific uapi definition by defining the correspondings _UAPI_DEF_*
macro as 0. This can fix symbol collisions for them, as long as the
libc headers are included before the uapi headers. Inclusion in the
other order is outside the scope of this commit.

All infrastructure in order to enable this fallback for unsupported
libcs is already in place, except that libc-compat.h unconditionally
defines all _UAPI_DEF_* macros to 1 for all unsupported libcs so that
any previous definitions are ignored. In order to fix this, this commit
merely makes these definitions conditional.

This commit together with the musl libc commit

http://git.musl-libc.org/cgit/musl/commit/?id=04983f2272382af92eb8f8838964ff944fbb8258

fixes for example the following compiler errors when <linux/in6.h> is
included after musl's <netinet/in.h>:

./linux/in6.h:32:8: error: redefinition of 'struct in6_addr'
./linux/in6.h:49:8: error: redefinition of 'struct sockaddr_in6'
./linux/in6.h:59:8: error: redefinition of 'struct ipv6_mreq'

The comments referencing glibc are still correct, but this file is not
only used for glibc any more.

Signed-off-by: Felix Janda <felix.janda@...teo.de>
Reviewed-by: Hauke Mehrtens <hauke@...ke-m.de>
---

v4: Extend patch description with comment about glibc comments
v3: Fix typos, add a comment to the file and use #ifndef.
v2: The only change to the previous version is the commit title and
    message.

This was send to linux-api@...r.kernel.org before and it was suggested 
that this patch should go through the networking tree to Linus because 
most of these definitions are networking related.

 include/uapi/linux/libc-compat.h | 55 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 54 insertions(+), 1 deletion(-)

diff --git a/include/uapi/linux/libc-compat.h b/include/uapi/linux/libc-compat.h
index 282875cf8056..8254c937c9f4 100644
--- a/include/uapi/linux/libc-compat.h
+++ b/include/uapi/linux/libc-compat.h
@@ -168,46 +168,99 @@
 
 /* If we did not see any headers from any supported C libraries,
  * or we are being included in the kernel, then define everything
- * that we need. */
+ * that we need. Check for previous __UAPI_* definitions to give
+ * unsupported C libraries a way to opt out of any kernel definition. */
 #else /* !defined(__GLIBC__) */
 
 /* Definitions for if.h */
+#ifndef __UAPI_DEF_IF_IFCONF
 #define __UAPI_DEF_IF_IFCONF 1
+#endif
+#ifndef __UAPI_DEF_IF_IFMAP
 #define __UAPI_DEF_IF_IFMAP 1
+#endif
+#ifndef __UAPI_DEF_IF_IFNAMSIZ
 #define __UAPI_DEF_IF_IFNAMSIZ 1
+#endif
+#ifndef __UAPI_DEF_IF_IFREQ
 #define __UAPI_DEF_IF_IFREQ 1
+#endif
 /* Everything up to IFF_DYNAMIC, matches net/if.h until glibc 2.23 */
+#ifndef __UAPI_DEF_IF_NET_DEVICE_FLAGS
 #define __UAPI_DEF_IF_NET_DEVICE_FLAGS 1
+#endif
 /* For the future if glibc adds IFF_LOWER_UP, IFF_DORMANT and IFF_ECHO */
+#ifndef __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO
 #define __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO 1
+#endif
 
 /* Definitions for in.h */
+#ifndef __UAPI_DEF_IN_ADDR
 #define __UAPI_DEF_IN_ADDR		1
+#endif
+#ifndef __UAPI_DEF_IN_IPPROTO
 #define __UAPI_DEF_IN_IPPROTO		1
+#endif
+#ifndef __UAPI_DEF_IN_PKTINFO
 #define __UAPI_DEF_IN_PKTINFO		1
+#endif
+#ifndef __UAPI_DEF_IP_MREQ
 #define __UAPI_DEF_IP_MREQ		1
+#endif
+#ifndef __UAPI_DEF_SOCKADDR_IN
 #define __UAPI_DEF_SOCKADDR_IN		1
+#endif
+#ifndef __UAPI_DEF_IN_CLASS
 #define __UAPI_DEF_IN_CLASS		1
+#endif
 
 /* Definitions for in6.h */
+#ifndef __UAPI_DEF_IN6_ADDR
 #define __UAPI_DEF_IN6_ADDR		1
+#endif
+#ifndef __UAPI_DEF_IN6_ADDR_ALT
 #define __UAPI_DEF_IN6_ADDR_ALT		1
+#endif
+#ifndef __UAPI_DEF_SOCKADDR_IN6
 #define __UAPI_DEF_SOCKADDR_IN6		1
+#endif
+#ifndef __UAPI_DEF_IPV6_MREQ
 #define __UAPI_DEF_IPV6_MREQ		1
+#endif
+#ifndef __UAPI_DEF_IPPROTO_V6
 #define __UAPI_DEF_IPPROTO_V6		1
+#endif
+#ifndef __UAPI_DEF_IPV6_OPTIONS
 #define __UAPI_DEF_IPV6_OPTIONS		1
+#endif
+#ifndef __UAPI_DEF_IN6_PKTINFO
 #define __UAPI_DEF_IN6_PKTINFO		1
+#endif
+#ifndef __UAPI_DEF_IP6_MTUINFO
 #define __UAPI_DEF_IP6_MTUINFO		1
+#endif
 
 /* Definitions for ipx.h */
+#ifndef __UAPI_DEF_SOCKADDR_IPX
 #define __UAPI_DEF_SOCKADDR_IPX			1
+#endif
+#ifndef __UAPI_DEF_IPX_ROUTE_DEFINITION
 #define __UAPI_DEF_IPX_ROUTE_DEFINITION		1
+#endif
+#ifndef __UAPI_DEF_IPX_INTERFACE_DEFINITION
 #define __UAPI_DEF_IPX_INTERFACE_DEFINITION	1
+#endif
+#ifndef __UAPI_DEF_IPX_CONFIG_DATA
 #define __UAPI_DEF_IPX_CONFIG_DATA		1
+#endif
+#ifndef __UAPI_DEF_IPX_ROUTE_DEF
 #define __UAPI_DEF_IPX_ROUTE_DEF		1
+#endif
 
 /* Definitions for xattr.h */
+#ifndef __UAPI_DEF_XATTR
 #define __UAPI_DEF_XATTR		1
+#endif
 
 #endif /* __GLIBC__ */
 
-- 
2.11.0

Powered by blists - more mailing lists

Confused about mailing lists and their use? Read about mailing lists on Wikipedia and check out these guidelines on proper formatting of your messages.