Openwall GNU/*/Linux - a small security-enhanced Linux distro for servers
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Mon, 20 May 2019 16:19:33 -0700
From: Thomas Garnier <thgarnie@...omium.org>
To: kernel-hardening@...ts.openwall.com
Cc: kristen@...ux.intel.com,
	Thomas Garnier <thgarnie@...gle.com>,
	Pavel Machek <pavel@....cz>,
	"Rafael J . Wysocki" <rafael.j.wysocki@...el.com>,
	"Rafael J. Wysocki" <rjw@...ysocki.net>,
	Len Brown <len.brown@...el.com>,
	Thomas Gleixner <tglx@...utronix.de>,
	Ingo Molnar <mingo@...hat.com>,
	Borislav Petkov <bp@...en8.de>,
	"H. Peter Anvin" <hpa@...or.com>,
	x86@...nel.org,
	linux-pm@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH v7 08/12] x86/acpi: Adapt assembly for PIE support

From: Thomas Garnier <thgarnie@...gle.com>

Change the assembly code to use only relative references of symbols for the
kernel to be PIE compatible.

Position Independent Executable (PIE) support will allow to extend the
KASLR randomization range below 0xffffffff80000000.

Signed-off-by: Thomas Garnier <thgarnie@...gle.com>
Acked-by: Pavel Machek <pavel@....cz>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
---
 arch/x86/kernel/acpi/wakeup_64.S | 31 ++++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S
index 510fa12aab73..e080e943e295 100644
--- a/arch/x86/kernel/acpi/wakeup_64.S
+++ b/arch/x86/kernel/acpi/wakeup_64.S
@@ -14,7 +14,7 @@
 	 * Hooray, we are in Long 64-bit mode (but still running in low memory)
 	 */
 ENTRY(wakeup_long64)
-	movq	saved_magic, %rax
+	movq	saved_magic(%rip), %rax
 	movq	$0x123456789abcdef0, %rdx
 	cmpq	%rdx, %rax
 	jne	bogus_64_magic
@@ -25,14 +25,14 @@ ENTRY(wakeup_long64)
 	movw	%ax, %es
 	movw	%ax, %fs
 	movw	%ax, %gs
-	movq	saved_rsp, %rsp
+	movq	saved_rsp(%rip), %rsp
 
-	movq	saved_rbx, %rbx
-	movq	saved_rdi, %rdi
-	movq	saved_rsi, %rsi
-	movq	saved_rbp, %rbp
+	movq	saved_rbx(%rip), %rbx
+	movq	saved_rdi(%rip), %rdi
+	movq	saved_rsi(%rip), %rsi
+	movq	saved_rbp(%rip), %rbp
 
-	movq	saved_rip, %rax
+	movq	saved_rip(%rip), %rax
 	jmp	*%rax
 ENDPROC(wakeup_long64)
 
@@ -45,7 +45,7 @@ ENTRY(do_suspend_lowlevel)
 	xorl	%eax, %eax
 	call	save_processor_state
 
-	movq	$saved_context, %rax
+	leaq	saved_context(%rip), %rax
 	movq	%rsp, pt_regs_sp(%rax)
 	movq	%rbp, pt_regs_bp(%rax)
 	movq	%rsi, pt_regs_si(%rax)
@@ -64,13 +64,14 @@ ENTRY(do_suspend_lowlevel)
 	pushfq
 	popq	pt_regs_flags(%rax)
 
-	movq	$.Lresume_point, saved_rip(%rip)
+	leaq	.Lresume_point(%rip), %rax
+	movq	%rax, saved_rip(%rip)
 
-	movq	%rsp, saved_rsp
-	movq	%rbp, saved_rbp
-	movq	%rbx, saved_rbx
-	movq	%rdi, saved_rdi
-	movq	%rsi, saved_rsi
+	movq	%rsp, saved_rsp(%rip)
+	movq	%rbp, saved_rbp(%rip)
+	movq	%rbx, saved_rbx(%rip)
+	movq	%rdi, saved_rdi(%rip)
+	movq	%rsi, saved_rsi(%rip)
 
 	addq	$8, %rsp
 	movl	$3, %edi
@@ -82,7 +83,7 @@ ENTRY(do_suspend_lowlevel)
 	.align 4
 .Lresume_point:
 	/* We don't restore %rax, it must be 0 anyway */
-	movq	$saved_context, %rax
+	leaq	saved_context(%rip), %rax
 	movq	saved_context_cr4(%rax), %rbx
 	movq	%rbx, %cr4
 	movq	saved_context_cr3(%rax), %rbx
-- 
2.21.0.1020.gf2820cf01a-goog

Powered by blists - more mailing lists

Your e-mail address:

Confused about mailing lists and their use? Read about mailing lists on Wikipedia and check out these guidelines on proper formatting of your messages.