[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Sun, 15 May 2011 11:18:49 -0500
From: "JimF" <jfoug@....net>
To: <john-dev@...ts.openwall.com>
Subject: Re: FW: something wrong with the HDAA_fmt.c programming for 64-bit Solaris
This should work (add this BEFORE the #if defined (__MMX__) block at the top that includes the mmintrin.h header).
#if defined (sun) && defined (__x86_64__)
#undef __MMX__
#endif
----- Original Message -----
From: Robert Harris
To: john-dev@...ts.openwall.com
Sent: Sunday, May 15, 2011 9:51 AM
Subject: RE: [john-dev] FW: something wrong with the HDAA_fmt.c programming for 64-bit Solaris
Jim,
No errors for "make clean solaris-x86-sse2-gcc" or "solaris-x86-mmx-gcc" (After changing bench.c to #define _XOPEN_SOURCE 500)
Errors with "make clean solaris-x86-64-gcc" It appears I get the same error with RC3, see below.
gcc -c -Wall -O2 -fomit-frame-pointer -I/usr/local/include -m64 -DHAVE_CRYPT -funroll-loops HDAA_fmt.c
HDAA_fmt.c:16:22: mmintrin.h: No such file or directory
HDAA_fmt.c:100: error: syntax error before "conv"
HDAA_fmt.c:100: warning: type defaults to `int' in declaration of `conv'
HDAA_fmt.c:100: warning: data definition has no type or storage class
HDAA_fmt.c:152: error: syntax error before "src"
HDAA_fmt.c: In function `bin2ascii':
HDAA_fmt.c:157: error: `__m64' undeclared (first use in this function)
HDAA_fmt.c:157: error: (Each undeclared identifier is reported only once
HDAA_fmt.c:157: error: for each function it appears in.)
HDAA_fmt.c:157: error: syntax error before "l"
HDAA_fmt.c:164: error: `t' undeclared (first use in this function)
HDAA_fmt.c:164: warning: implicit declaration of function `_mm_set1_pi32'
HDAA_fmt.c:167: error: `u' undeclared (first use in this function)
HDAA_fmt.c:167: warning: implicit declaration of function `_mm_and_si64'
HDAA_fmt.c:167: warning: implicit declaration of function `_mm_srli_si64'
HDAA_fmt.c:167: error: `src' undeclared (first use in this function)
HDAA_fmt.c:168: error: `v' undeclared (first use in this function)
HDAA_fmt.c:171: error: `l' undeclared (first use in this function)
HDAA_fmt.c:171: warning: implicit declaration of function `_mm_unpacklo_pi8'
HDAA_fmt.c:172: error: `r' undeclared (first use in this function)
HDAA_fmt.c:172: warning: implicit declaration of function `_mm_unpackhi_pi8'
HDAA_fmt.c:175: warning: implicit declaration of function `_mm_add_pi32'
HDAA_fmt.c:187: warning: implicit declaration of function `_mm_mullo_pi16'
HDAA_fmt.c: In function `hdaa_crypt_all':
HDAA_fmt.c:237: error: `__m64' undeclared (first use in this function)
HDAA_fmt.c:237: error: syntax error before "h1"
HDAA_fmt.c:252: error: `h1' undeclared (first use in this function)
HDAA_fmt.c: In function `hdaa_salt':
HDAA_fmt.c:295: error: `__m64' undeclared (first use in this function)
HDAA_fmt.c:295: error: syntax error before "h2"
HDAA_fmt.c:316: error: `h2' undeclared (first use in this function)
*** Error code 1
make: Fatal error: Command failed for target `HDAA_fmt.o'
Current working directory /export/home/rharris/john-1.7.7-jumbo-3-RC1/src
*** Error code 1
make: Fatal error: Command failed for target `solaris-x86-64-gcc'
bash-3.00$ pwd
/export/home/rharris/john-1.7.7-jumbo-3-RC1/src
-Robert
From: JFoug [mailto:jfoug@....net]
Sent: Saturday, May 14, 2011 11:50 PM
To: john-dev@...ts.openwall.com
Subject: Re: [john-dev] FW: something wrong with the HDAA_fmt.c programming for 64-bit Solaris
Please check out md5_gen(21) (jumbo-3-RC1, but also may be there in Jumbo-2-RC1)), and see if it works on teh 64 bit solaris, and if it is faster (I think it 'should' be). If it is 64 bit x86 Solaris, then I believe it is one of the formats that are commented out (they fail self tests, and I have been commented out. However, for 32 bit sparc (and other BE systems), it should work fine. NOTE, I have not built for sparc-64, thus have not tested that.
The md5_gen will use the MD5_X2 code from md5_std for the first crypt. the HDAA_fmt.c uses OpenSSL MD5. THe md5_std code is faster, in most cases. The last crypt is done using the OpenSSL, since it is over 54 bytes long.
Jim.
----- Original Message -----
From: Robert Harris
To: romain.raboin@...il.com
Cc: john-dev@...ts.openwall.com
Sent: Saturday, May 14, 2011 10:00 PM
Subject: [john-dev] FW: something wrong with the HDAA_fmt.c programming for 64-bit Solaris
Mr. Raboin,
Can you confirm this problem? Do you have time to correct this?
I can help you test it, if you would like.
-Robert B. Harris from VA
From: Robert Harris [mailto:rs904c@...scape.net]
Sent: Saturday, May 14, 2011 5:10 PM
To: 'john-dev@...ts.openwall.com'
Subject: something wrong with the HDAA_fmt.c programming for 64-bit Solaris
John Dev,
I think there is something wrong with HDAA_fmt.c for 64-bit Solaris. I don't get this problem when I compile JtR 32-bit on Solaris.
This format is preventing me from compiling the 64-bit version on Solaris x86, (make clean solaris-x86-64-gcc)
As an experiment, I removed this format out of the Makefile and john.c and the 64-bit version compiled for me just fine.
Here is the error lines, when I do make clean solaris-x86-64-gcc:
gcc -c -Wall -O2 -fomit-frame-pointer -I/usr/local/include -m64 -DHAVE_CRYPT -funroll-loops HDAA_fmt.c
HDAA_fmt.c:16:22: mmintrin.h: No such file or directory
HDAA_fmt.c:100: error: syntax error before "conv"
HDAA_fmt.c:100: warning: type defaults to `int' in declaration of `conv'
HDAA_fmt.c:100: warning: data definition has no type or storage class
HDAA_fmt.c:152: error: syntax error before "src"
HDAA_fmt.c: In function `bin2ascii':
HDAA_fmt.c:157: error: `__m64' undeclared (first use in this function)
HDAA_fmt.c:157: error: (Each undeclared identifier is reported only once
HDAA_fmt.c:157: error: for each function it appears in.)
HDAA_fmt.c:157: error: syntax error before "l"
HDAA_fmt.c:164: error: `t' undeclared (first use in this function)
HDAA_fmt.c:164: warning: implicit declaration of function `_mm_set1_pi32'
HDAA_fmt.c:167: error: `u' undeclared (first use in this function)
HDAA_fmt.c:167: warning: implicit declaration of function `_mm_and_si64'
HDAA_fmt.c:167: warning: implicit declaration of function `_mm_srli_si64'
HDAA_fmt.c:167: error: `src' undeclared (first use in this function)
HDAA_fmt.c:168: error: `v' undeclared (first use in this function)
HDAA_fmt.c:171: error: `l' undeclared (first use in this function)
HDAA_fmt.c:171: warning: implicit declaration of function `_mm_unpacklo_pi8'
HDAA_fmt.c:172: error: `r' undeclared (first use in this function)
HDAA_fmt.c:172: warning: implicit declaration of function `_mm_unpackhi_pi8'
HDAA_fmt.c:175: warning: implicit declaration of function `_mm_add_pi32'
HDAA_fmt.c:187: warning: implicit declaration of function `_mm_mullo_pi16'
HDAA_fmt.c: In function `hdaa_crypt_all':
HDAA_fmt.c:237: error: `__m64' undeclared (first use in this function)
HDAA_fmt.c:237: error: syntax error before "h1"
HDAA_fmt.c:252: error: `h1' undeclared (first use in this function)
HDAA_fmt.c: In function `hdaa_salt':
HDAA_fmt.c:295: error: `__m64' undeclared (first use in this function)
HDAA_fmt.c:295: error: syntax error before "h2"
HDAA_fmt.c:317: error: `h2' undeclared (first use in this function)
*** Error code 1
make: Fatal error: Command failed for target `HDAA_fmt.o'
Current working directory /export/home/rharris/john-1.7.7-jumbo-1-Solaris32x86-with source/src
*** Error code 1
-Robert B. Harris from VA
Content of type "text/html" skipped
Powered by blists - more mailing lists
Confused about mailing lists and their use?
Read about mailing lists on Wikipedia
and check out these
guidelines on proper formatting of your messages.
